Upgrade driver feels wrong? Where is Win10's self-examination problem?

Although, Windows 10 has been able to drive mainstream hardware, hardware that cannot be self-driven will also be retrieved, downloaded, and updated on its own server. However, when the drive is changed, the old driver will not be unloaded. In addition, peripheral peripherals will be plugged and unplugged. This will also allow Windows 10 to repeatedly search, download, and load the local and server. This is an iterative process. . Do not believe? If you recall whether you have unplugged the hard disk or set certain hardware settings, you will know the true blue screen.

The best way to check whether a driver is faulty is not the third-party software that drives XX, but the "driver verifier manager" built into Windows itself. Use it to give hardware pressure, test the stability of the driver, and if it triggers The "blue screen", it did not run, there is a problem with the built-in driver, clean up and load the correct driver.

Please read the following carefully, it is very important!

Before activating the "Driver Verifier Manager", we must be prepared for everything, mainly because it belongs to the type of "deceased battle" and basically there is no room for recovery once it is launched. If the verification is successful, if it fails, Windows will cycle in the process of “reboot-read disk-blue screen”. There is no special means to intervene in it!

So before you start it, you must make the following preparations:

1, to ensure that the computer after the boot with the keyboard to enter the Windows safe mode, such as mad press F8;

2. There is a system installation disk at hand and a restore point is created for the system. The system can be restored at the first time.

Are you sure you are ready? If you do a good job, start preparing to detect if your drive is in error. Enter verifier after the Win+R key combination, in the pop-up window, select "create custom settings (for the program developer use)" after the next step.

All the test items that can be performed on the driver are listed in the application list at this time. Uncheck the "Random Low Resource Simulation" and "DDI Compatibility Check (Extra)". All other options are selected.

In the following window, you can choose which driver to test. The partner who has confidence in Microsoft chose the “unsigned driver” and chose the second one to find compatibility problems. It is not sure which driver has problems but uses the third one. Think that after the installation of a driver, the computer has a problem, then the fourth custom.

Before selecting "Complete", be sure to confirm that you have done the preparatory work. After you click, Windows 10 will restart and start running the test.

During the test process, once the blue screen is displayed, the detailed error message (usually the long file name of the driver) will be displayed on the screen.

If the system enters an endless loop of repeated blue screen reboots, enter safe mode, and Win+R enters verifier and select “Delete Existing Settings” to stop testing. Remember to remember!