Need to remove the screw and circle it in red. Use the green arrow to indicate the direction of disassembly.
4 mats, hey! Leak out 4 screws.
Remove the nameplate sticker and there are two screws below.
The pads are easy to handle, the stickers are sticky and vulnerable. It is recommended to heat the hair dryer before peeling off.
Remove the plastic exhaust vents on both sides. There are 4 buckles on each side. pry! Deformation toughness (very strong), bold force.
Note that the position of the buckles on both sides is different, that is, the left and right sides and the installation orientation are distinguished. Pay attention when you put it back.
The aluminum casing is removed in a "pull" manner.
Note that it is drawn in the direction of the fan duct exhaust vent.
Do not rush to remove the 4 screws on the motherboard after removing the case.
Next is the only difficulty in the R3D replacement hard drive disassembly process, the hard drive SATA port adapter cable.
This part requires patience and a few more pictures.
Remove the protective cover first. pry. There are no components on the board around the protective cover, and the possibility of tearing down is small.
Sijee Fiber optic adaptors are part of passive components for FTTH ODN connectivity, Sijee Fiber optic adaptors are used to join two fiber optic patch cables together for realizing the transition between different interfaces and they are available for use with either single-mode or multimode fiber optic patch cord. Sijee Fiber optic adaptors can offer superior low loss performance with very high repeatability.
Sijee offers different types of fiber adaptors comply with ITU standard, main products including Fiber Mating Sleeve Adaptor, Fiber Hybrid Adaptor, Fiber Bare Fiber Adaptor, Fiber Mechanical Attenuator, Field Assembly Optical Connector (FAOC), Splice-On Connector, Semi-finished Fiber Connector, etc.
Optical Fiber Couplers,Optical Fiber Adapter,Fiber Optic Adapter,Fiber Optic Flange are available.
Features:
1. Compliant with: IEC, JIS, Telcordia
2. Convenience and ease of handling
3. Optical performance 100% factory tested
4. Flange or threaded mounting type
5. Ceramic/Zirconia or phosphorous bronze sleeves
6. Good changeability and repeatability
Applications:
1. Telecommunication networks
2. FTTX, FTTH
3. LAN, WAN, CATV networks
4. Fiber communications, Data communication networks and processing, Industrial, Mechanical and Military.
5. Active device termination
Optical Fiber Couplers,Optical Fiber Adapter,Fiber Optic Adapter,Fiber Optic Flange
Sijee Optical Communication Technology Co.,Ltd , https://www.sijee-optical.com