The ITX game console was built up because of Blizzard. At the end of May, he accidentally strayed into the pit of Watchman's ass. Then he discovered that this game was greatly unfavorable. The HD530 episode was basically a mosaic, and the OSX system did not directly support it. The MBA was simply eliminated. Just after graduating, I had room to install a desktop machine, taking into account the convenience of moving in the future, I accidentally misentered the ITX host pit.
Let's talk about the overall configuration:
Chassis selection, in order to pursue the ultimate slim, select the FD's Node 202, the biggest point of this cargo is to be able to put down full-size graphics card, and the thickness of less than 10CM, on the table area is small.
Before installing the computer for the sister, with a Samsung SM951, PCI-E hard disk really cool, so when they installed this machine requires the motherboard must have M.2 interface, so only on the new platform. Excluding a lot of cheap ITX, found that B150 with M.2 really expensive, with the Z170 is not much worse, so it on the Z170 ... ... Greedy cheaper on the pit cargo, followed by more detailed.
Since on the Z170, not how to afford the motherboard with a K processor, and then accidentally entered the i7-6700K ... ...
The memory went into Kingston before the price increase, 2400 should be enough, and the vest was not high.
The following is the choice of heat, the requirements of the Node 202 on heat dissipation is less than 56mm, it can only be up and down pressure heat, and the beginning is the goods
Known as the 6 heat pipe, it looks like a very powerful look. As a result, when it comes back to a device, it becomes aggressive. It is found that this motherboard is a wonderful work. It is simply a mass killer that pushes down heat. The left side of the picture is a wonderful USB 3.0 cable jack. The top is the upright wireless card module. The bottom is the memory socket. So IS-60 can't be installed in any direction, either touching the network card, or blocking the 3.0 socket, or Pressed into the memory, and the bottom buckle seems to conflict with the capacitance.
So how to do it, but had to carefully change the heat, and with a sly mood of a single Gabriel, this luck is good, 12cm fan cooling actually one side can be perfectly installed on this motherboard. The height of Gabriel is 60mm, which exceeds the limit of the chassis parameters. However, a dust-proof net can be removed above the intake of the CPU fan. After removal, it can be put down. The heat dissipation limit of this chassis is also so high.
Graphics card is the last to start, look good RX 480, looking forward to farmers can stand up, the results just in the Lynx orders, at night found that the power consumption is higher than 970, there is the risk of burning PCI-E, the next day Early in the morning, 1070 was quickly cancelled.
So began a long road to wait for 1070, and finally one day wait until the GALAXY General assassin's car, with JAD for GAMER is a thing, only to find the ticket after the discovery, this cargo is a pit father 2.5 slot card, Node 202 The video card cage is like this, only the standard double slot card can be plugged.
Had to turn on the miserable red car next door, the legendary real fantasy double heat pipe.
All kinds of unpacking are skipped. The following is the start of the installation. The internal structure of the car after speeding up is probably the case. The upper left is the main board, the upper right is the power supply, and the lower graphics board is parallel to the main board by way of transfer.
The part of the transfer is long, and it is more reliable than the soft extension cable through two PCB connections.
As the graphics CPU motherboards exceed the original budget, so they had to shrink in the power supply, not on the silver Yin 500W SFX-L power supply, chose domestic HuntKey 350W. The power consumption of the 6700K+GTX 1070 should be less than 300W. The single-channel 350 bareman can meet the requirements. We hope that BOOM will not...
Finally, after the computer is installed, the desktop is probably the same. The monitor is an AOC with a fish screen. The border is very wide and the gap is large. However, the display effect is still very satisfactory. The chassis is very small and can be directly behind the monitor. What is the space, the keyboard is a cool 87 change pbt keycap, headphones are pushed countless times the SHP9500, there is a small homemade amp ... ... there is a DELL in the bottom left corner 7040m, really small, my ITX in In front of this cargo is simply a big Mac.
After the installation is a performance test, and then forced, this motherboard after the cpu overclocking, single roasting fpu, will be severely reduced to 800MHz, found on the Internet to find common problems, the forum is also foreign feedback, About 70w of power consumption will appear when the frequency reduction phenomenon.
Looked at the main board materials, the power supply material seems to have no essential difference with the higher-level Gaming series, the biggest difference is that the Gaming series power supply MOS has the heat dissipation, and the Z170N WIFI does not have, checked the power supply master control data, There is indeed a temperature protection function, and that's probably the problem here.
However, there were no heat sinks on the pits of the motherboard. Finally, they bought several heat sinks on Taobao.
After affixing heat, the phenomenon of high temperature frequency reduction has been effectively alleviated, at least to 4.5G, running CINEBENCH will not be down, this state P95 limit baking machine will still be down, but does not affect the actual use.
Say 1070 problem, this generation 1070 has Boost 3.0 technology, as long as the chip constitution is good enough, the basic will automatically overclock, so do not worry too much about the default frequency, I get this piece of the Rainbow be regarded as general constitution. Due to the limitations of the power-consumption wall, if the chip power consumption is high, it is still necessary to reduce the frequency, so the high-temperature frequency reduction is actually because the increase in temperature increases power consumption will be reduced, similarly different chips stable frequency is different chips Different power consumption.
In the last 1070 minutes of running, after the overclocking, it was probably like this, the physical quality was poor, and the good health of this generation can be divided into tens of thousands.
In the end, you can run Wizard 3, and the full effect can be about 70 degrees, and the frequency is more like 2G. This card looks like a common problem with slight whistle, mind cautiously.
This is the basic tossing finished, you can safely watch the ass ... ... look forward to new heroes.
Yuchai 401-999KW Diesel Generator
Yuchai 401-999Kw Diesel Generator,Yuchai Power Generator,Yuchai Diesel Genset,Yuchai Super Silent Power Generator
Shanghai Kosta Electric Co., Ltd. , https://www.shkostagenerator.com