Installation process 1 Mobile phone installation Sofa butler mobile phone → 2 Mobile phone and TV are connected by the same router → 3 mobile phone push installation → 4 Installation is successful
Steps
1. Use Android phone to download and install the sofa butler mobile version: http://pub.shafa.com/download/shafa_mobile.apk;
The 2. Open the sofa butler mobile phone version on the mobile phone;
The 3, the need for mobile phones and the need to install the sofa butler of the TV (or box) in the same LAN (for example, mobile phones and TVs use the same home Wi-Fi); sofa butler mobile phone page select "install sofa butler"
The 4. For other equipment than Xiaomi brand, please select "Other brand equipment installation"
The 5, find the IP corresponding TV (or box), and click on the link. [If the corresponding device is not displayed, click on the connection failed, the sofa butler phone version shows "find device", please wait a moment]
The 6. After clicking the connection button, the installation package will be automatically sent to the TV for installation. The installation process may take a few minutes. Please wait patiently.
The 7, mobile phone screen as shown in the figure, indicating that the installation has been successful.
The It may take a long time for the sofa butler mobile version to connect to the TV. Please try to connect several times.
It may take a long time for the sofa butler mobile version to connect to the TV. Please try to connect several times. If you still cannot connect successfully, your TV needs to be set. Please turn on the settings as follows:
First, enter the factory mode to find the local information, in the interface of the local information, use the remote control to input "up, down, left, right, or left and right" in order to open the factory menu.
Second, open ADB
For example, Skyworth E660E: After entering the factory menu - select the common switch - ADB is set to "on", the interface is as follows:
The The above is the interface of the Skyworth E660E model. The interface of each model is slightly different.
How to open each model:
42K1, 42K1T, 42K1Y, 42K1TY, 55K1, 55K1T:
- The ADB switch can be turned on in the advanced settings of the factory menu, and the password "123456" can be entered.
40K1Y, 49K1Y, 49K1C:
- There is an "Adbd Enable" in the other settings of the factory menu. Change the following parameter to 1.
The 40U1, 58U1:
- There are no ADB-related options in the factory menu, but it is said that the firmware will automatically open after upgrading to February 2014.
Note: After the ADB switch is turned on, some devices may need to be powered off to restart.
The following models of Skyworth have verified that the mobile version can be used for push installation:
E710U, E690U, E510, E510E, E660E, E730, E790, E790U, E860, E760, E900, E390E, K1C, 8A16 K1, E5DHR, E660C, 6A801, 8S50 E5DHR, 8A14 K1T, E386E
If the installation fails, restart the device and try again by following the steps (may be useful). Still have questions please add the following sofa butler official QQ group.
Anisotropic magnets are magnets whose magnetization directions in the magnets are aligned in a certain direction.
Magnet powder for anisotropic magnets is composed of a single crystal or polycrystal with an aligned direction of magnetization in one magnet particle. When a magnetic field is applied externally during molding (this magnetic field is called an aligning magnetic field), the magnet powder moves to align with the direction of the magnetic field and is solidified in an aligned state, resulting in an anisotropic magnet. Magnet powder aligned with an aligning magnetic field is solidified with keeping magnetization. Therefore, after removing the alignment magnetic field, the molded body becomes a magnet having a magnetic force.
Anisotropic Ferrite Magnets y30,Pump Magnet,12x18 Cooler Pump Magnet,Submersible Pump Magnet
HU NAN YUBANG MAGNETIC MATERIAL CO.,LTD , https://www.ybmagnet.com