Cabling motion signal processing circuit

Probe domestic double-head probe 038-BB-5.7L The shape of the two ends of the needle is outside the pointed needle

Industrial Router Crystal 3.2*2.5mm 3225 26M (26.000MHZ) 12PF 10PPM 20PPM 30PPM

In addition to the basic gyro stabilization function, the pod system must also have functions such as cruise and tracking. Therefore, the entire pod system also has a processing circuit for rotating signals and drifting signals. These two signals are controlled by the corresponding switch buttons on the control panel (HCU). The figure shows the schematic diagram of the motion signal processing circuit of the pod.