ZS6300 three-in-one synchronous boost mobile power supply dedicated chip, charging current 1A, 2A, 3A (battery end), boosting efficiency up to 94% (1A) 92% (2A), boost constant current constant power output function, small current The product is also compatible with high current equipment, flashlight function / long press shutdown function, one battery, low battery LED alarm function, boost output switching frequency 500K. The ZS6300 is available in a SOP-16 package.
Pin map
Pin function
System frame
1. Charging function
The ZS6300 uses a switching method to charge the battery with turbulent/constant current/constant voltage three-stage charging. When the battery voltage is lower than 3V, trickle charging is performed; when the battery voltage is higher than 3V, constant current charging is performed; when the battery voltage is close to 4.2V, constant voltage charging is performed, at which time the charging current starts to gradually decrease, when the current is reduced to When 1/10 of the constant current charging current is used, all 4 LED lights are always on, indicating that the battery is fully charged. When fully charged, the battery is terminated and recharged while waiting for the battery voltage to drop to a certain voltage (VRECHG).
2. Charging current setting
The amount of current that charges the battery is set by the sampling resistor RS between the SNS pin and the BAT pin of the chip. Constant current charging current ICharge
Determined by: ICHARGE=0.02/RS
The trickle charge current is 1/8 of ICHARGE, and the charge current is 1/10 of ICHARGE.
3. Charging soft start function
When the battery directly enters the constant current charging, the ZS6300 will control the charging current to gradually increase to the set value, avoiding various problems caused by the instantaneous large current impact.
4. Button side charging function
The ZS6300 has a button-on-load side-loading function to ensure priority power supply to the USB port. If the output USB is connected to the load at the same time to supply power to the load, it can be activated by pressing the button. The ZS6300 will control the system to charge the battery and supply power to the load. If the current required by the load exceeds VRCS 6.5mV, ZS6300 The control system will give priority to the load, and gradually reduce the charging current until it is not charged, so that all input current is supplied to the load, and the effect of input current limiting is achieved. If the VRCS is 5.5mV, the chip will control to restore the battery charging.
When the mobile power is charging, short press the button, the chip will control to turn off the charging, and open the output USB port to detect whether there is a portable device connected to the USB port. If there is, the power will be given priority. If not, the battery will be charged after 15s.
China Laptop Stand Adjustable,Adjustable Macbook Stand manufacturer, choose the high quality Ergonomic Adjustable Laptop Stand,Laptop Stand Aluminum Adjustable, etc.
Shenzhen Chengrong Technology Co.ltd is a high-quality enterprise specializing in metal stamping and CNC production for 12 years. The company mainly aims at the R&D, production and sales of Notebook Laptop Stands and Mobile Phone Stands. From the mold design and processing to machining and product surface oxidation, spraying treatment etc ,integration can fully meet the various processing needs of customers. Have a complete and scientific quality management system, strength and product quality are recognized and trusted by the industry, to meet changing economic and social needs .
Portable Laptop Stand Adjustable,Best Laptop Stand Adjustable,Aluminum Laptop Stand Adjustable
Shenzhen ChengRong Technology Co.,Ltd. , https://www.dglaptopstandsupplier.com