Use of Solaar-929 Atomic Absorption Spectrometer

After the introduction of atomic absorption spectrometers in electronic computer technology, instruments with better performance are generally controlled by microcomputers, but the methods are not consistent due to the different models of the instruments. Taking the Solaar-929 atomic absorption spectrometer produced by ATIUNICAM in the United States as an example, the method of using an atomic absorption spectrometer is used.

1. Turn on the host computer, enter the Windows window, select the Solaar-929 cursor to press twice, enter this page, enter the Lamp in the Spectmeter, set the required lamp and lamp current, enter the element, select Elements of analysis.

2. Turn on the light, then set the light path to the Setup optics in the Action, enter the System, choose whether to use the flame or the graphite furnace.

3. Enter the Calibration parameter.

4. If a graphite furnace is used, the furnace program and the automata parameters are required.

5. Enter the Sequence input program.

6. Ignition, optimize gas flow, impact ball and flame head position.

7. The graphite furnace is optimized for burner position and autosampler position.

8. Select Analyse in the Action for analysis.

9. After the analysis is completed, select Save to save the file and print the result.

10. Exit Windows, shut down, shut off, and turn off water.

Ethernet Slip Ring

Ethernet Slip Ring is a device that allows Ethernet signals to be transmitted through a rotating assembly. This device is typically used in applications where it is not possible or practical to run Ethernet cables, such as in an application where the cables would have to travel through a hazardous area. It converts the regular Ethernet signals into rotary signals, which are then transmitted through the rotating assembly.

There is a growing trend in the industry for Ethernet slip rings. Ethernet slip rings are currently being used to interconnect computer networks. A slip ring is a transmission device that uses a counter-rotating encircling belt to transfer power and data between two or more devices.

Senripgrid Conductive Slip Ring has the following characteristics Direct unplugging of the RJ45 connector Upon reaching eight simultaneous ports, follow the standard cable connection method Work with either copper or gas-liquor joints Transmission to the external network (10M, 100M, 1Km Base T).

Ethernet Slip Ring,Generator Collector Rings,Through Bore Rotary Union,Rotary Pressure Joint

Dongguan Oubaibo Technology Co., Ltd. , https://www.sliproubo.com