With the rapid development of China's social economy, the civilized quality and scientific consumption concept of the vast number of consumers are also constantly improving, and consciously choosing energy-saving products has become a consumer fashion. Energy-saving lamp products have the characteristics of high luminous efficiency, long life and compact structure. They are not only the focus of the international lighting industry, but also the green lighting energy-saving products highly recommended by the country.
However, in recent years, consumers have found that although China is a big country in the production of energy-saving lamps, with advanced technology, equipment and quality control level, the export volume of products accounts for a large proportion in the global market, but the energy-saving lamps sold in the domestic market are For a variety of reasons, the product presents a status quo of “saving electricity and not saving moneyâ€.
In order to promote the development of the energy-saving lamp market, by providing objective and practical comparison information to the society, mobilize the enthusiasm of consumers to choose energy-saving lamps, and urge manufacturers to improve product quality, the China Consumers Association has been united since the third quarter of 2006. The consumer associations (committees) of Beijing, Shanghai and Guangdong have commissioned the National Electric Light Source Quality Supervision and Inspection Center (Beijing) on ​​the 23 brands of energy-saving lamps sold in the market, and their power, color tolerance, initial light efficiency, Four technical performance indicators such as lumen maintenance rate were tested and compared. Among the 23 samples, there were 22 valid samples, and 1 experiment light experiment with 1 sample could not complete all experiments without starting in the middle, so it could not participate in the comparison.
The comparison test results show that the measured power value of most samples is lower than the nominal value; the overall power saving effect of more than half of the samples is better, and the energy saving level of 36% of the samples needs to be improved; Individual samples have a short life span. The main reason for the energy-saving lamps "saving electricity and not saving money" is that the lamp has a low luminous flux maintenance rate and a short life. Of the 22 samples tested, 2 of the brand samples had a 2000-hour lumen maintenance rate of less than 80%, with only one sample being 70%. In addition, there were not all the test lights of the three brand samples for 2000 hours, and the individual sample test lamps did not even have a full 1000 hours, which could not be compared with other samples. The results of the comparative test also showed that the sample of Sunshine brand produced by Zhejiang Sunshine Group Co., Ltd., the sample of TCL brand produced by Huizhou TCL Lighting Appliance Co., Ltd., and the sample of Guangcai brand produced by Shanghai Guangda Lighting Co., Ltd. The sample of IKEA brand produced by IKEA Sweden Co., Ltd., the sample of PHILIPS brand produced by Philips Electronic Trading Service (Shanghai) Co., Ltd., and the sample of Huaqiang brand produced by Huaqiang Benbang Electric Co., Ltd. of Shunde District, Foshan City, and the nominal Fuzhou Zhiguang The quality performance of the sample of TOSHIBA brand produced by Lighting Co., Ltd. and the sample of Yikai Lighting Brand produced by Shanghai Yikai Lighting Appliance Co., Ltd. is relatively good.
Through the comparison of the price and performance of the sample, it is found that the higher the price, the better the performance index. Therefore, it is recommended that consumers should “shop around†and refer to the test results and comparative test data issued by the national administrative department and consumer association to select products with high cost performance. In addition, don't be blind to cheap, buy products with low quality and low price.
Experts remind consumers that when they are unable to obtain more detailed and accurate information, it is recommended to choose products with “CQCâ€, “CQCES energy saving†and “section†signs on the outer packaging or lamp holder. The “CQC†mark is the verification of the safety indicator of the energy-saving lamp, and the “CQCES energy-saving†and “section†word marks are verifications of the energy-saving performance indicators.
Since the state does not impose mandatory regulations on the labeling of energy-saving lamps, the labeling of energy-saving lamps currently sold in the market is not uniform. It is difficult for consumers to read the power of energy-saving lamps from a long list of English letters on the outer packaging of the product or on the energy-saving lamps. Product information such as rated voltage and illuminating color. For this reason, it is recommended that the state formulate mandatory specifications for the labeling of energy-saving lamps so that consumers can read and understand clearly and facilitate consumers to purchase.
Call on relevant authorities and industry associations to strengthen supervision and management of production enterprises, continuously improve product standards for energy-saving lamps, regulate the city's call for industry to raise business ethics awareness, strengthen self-discipline, and consciously safeguard consumer rights, production and sales are both energy-saving and Energy-saving lamp products that save money, promote the promotion and use of energy-saving products, and implement the major national policies of the Party Central Committee and the State Council on building a “resource-saving†and “environmentally friendly†society with practical actions.
1
The window is one of the basic optical components in optics. It is an optical flat panel that protects electronic components/sensors/semiconductor components in the optical path.
K9 (BK7) has excellent mechanical properties and very low bubbles and impurities, and has good scratch resistance. Due to its stable chemical properties, special grinding and polishing are not required. It is used in many fields such as optoelectronics, microwave technology, diffractive optical element and so on.
The window does not change the optical magnification and only affects the optical path in the optical path. Mechanical properties such as light transmittance, surface accuracy, thickness, parallelism, and substrate material are important parameters of the window. You can choose the window with the appropriate parameters according to the specific application. Such as zinc selenide (ZnSe) windows, germanium (Ge) windows, silicon (Si) windows, barium fluoride (BaF2) windows, calcium fluoride (CaF2) in the infrared (NIR/IR) spectral band Windows; Fused Silica windows used in the ultraviolet (UV) spectral band; K9 windows used in the visible light (VIS) spectral band, etc.
N-Bk7 Window,Optical Window,Laser Protection Lens Window,Window Wedge
Bohr Optics Co.,Ltd , https://www.bohr-optics.com