The traditional interior decoration, from the transportation, cutting and installation of the board, is completely manual operation, which is time-consuming and labor-intensive and cannot guarantee the standardization of all the operation processes, and the labor cost is high. In the construction industry, where the proportion of human resources in total costs is rising, how to reduce labor costs and at the same time ensure the standardization of engineering quality has always been annoying for the industry. Recently, the "Indoor Panel Construction Robot System" developed by Hebei Construction Engineering Group successfully solved this problem.
It is understood that in 2009, the “Indoor Panel Construction Robot System†project jointly developed by Hebei Construction Engineering Group and Hebei University of Technology was established in the “863†project. According to Li Yunwei, chairman of the group, the prototype of the project has been successfully produced and is currently undergoing field trials. It is expected that during the “Twelfth Five-Year Plan†period, production and actual operations will be put into operation, and the interior decoration problems that have plagued the construction industry for many years will be solved.
Another research project of Hebei Construction Engineering Group, “Building Plate Robotic Construction Equipment and Demonstration Application†has also been recommended by the Provincial Science and Technology Department to the National Science and Technology Department to participate in the national “Twelfth Five-Year†reserve project, and successfully entered the warehouse.
Antenk latach connector DIN 41651,Those products are used in more or less every known application within computer-, industrial-, telecommunication and specific automotive markets. This product technology allows cost effective connections between printed circuit boards based on removable or permanent connections based on a longterm proofed way of assembly. latch header connectors are available with the traditionally used pitch of 2.54mm and the pitch of 2.00mm,1.27mm.
Antenk Box header/Ejector header Description and Application:
Box header/ ejector header connector, With DIP straight/vertical, SMT,Right angle, 2.54pitch, 2.0pitch, 1.27pitch,
The commonly used Pin ways have 6P,8P,10P,14P,16P,20P, 24P,26P,30P,34P, 40P,50P,64P.
Box header/ ejector header and IDC Flat Cable connectors are two of the most commonly used connectors. Box headers can be found in nearly all electronic equipments.
This is a IDC product which allows cost effective connections between circuit boards based on permanent connection (using transition connector) or removable connection
(Using for IDC flat cable connectors).
Box header
Ejector header
Pcb Header,Latch Header Connectors,Ejector Header,Latch Ejector Connector,Box Header Connector With Latch ,Box Header Lock Type Connector
ShenZhen Antenk Electronics Co,Ltd , https://www.antenksocket.com